The S2R II baton is an improved version of the extremely popular S2R. As compact as possible. Its length is 5% shorter than its predecessor. Powered by 1 piece special 3200mAh 18650 lithium battery. The battery provides an extremely long operating time. The combination of the Luminus SST-40 CW LED with a peak output of 1150 lumens and the improved TIR lens provides incredible brightness and a balanced beam of light for the size of the lamp. Five brightness levels (0.5 lumens - moonlight, 15 lumens, 120 lumens, 400 lumens, 1150-400 lumens - turbo level, which becomes lower during heating) and a stroboscope mode can also be selected.
The appearance of the novelty has also retained the characteristics of the Baton series, which has been well-proven for years (removable belt clip, magnetic end cap, etc.), and the charging unit introduced in its predecessor also appears. The magnetic charging platform is not much bigger than a coin. The charging cable ends in a USB , so it can be charged almost anywhere (from a computer, from a USB cigarette lighter connector in a car, or with a mobile phone network adapter). All you have to do is bring the end of the lamp close to the magnetic charging platform, which will stick to it in an instant thanks to the magnet. The charging process is indicated by the charger with green and red lights.
It can be locked against accidental activation with the help of a lock function. In this case, when the switch button is pressed, the red light of the switch indicates that it is closed. The side switch also indicates the battery drain with a light. In the case of a green LED, the battery charge is above 70%, a yellow LED indicates a level between 15 and 70%, while the LED turns red below 15%. The included two-way clip can be removed and installed at any time, and can be practically fixed in countless places. In addition, of course, the magnetic battery cover can also be a great help if it is attached to a suitable surface and beacuse of this you can work with the light while your hands are free.
When switched on, the light gradually increases to the maximum brightness level. It gradually fades when turned off.
The electronics of the lamp are protected against reverse polarity. Protection against overheating reduces the maximum brightness after about a minute and a half. With the help of a timer function, it can be set to turn off automatically after 3 or 9 minutes.
The lamp works with a special 18650 battery, which can be ordered by clicking HERE. The negative pole is also led to the positive side of this, because this is how the magnetic charging base can charge. It also works with "traditional" 18650 batteries, but these batteries cannot be charged by the lamp, for which an external charging unit is required.
